Cart(0)

You have no items in your cart

Your Supplies...Delivered!
Call us at 307-423-0000

Key Features

  • Genuine ResMed part – ResMed part number 16117, Standard size headgear.
  • Fits several Mirage-series masks – Ultra Mirage, Ultra Mirage II, Mirage Activa LT and Mirage Quattro.
  • Upper and lower Velcro straps – Adjust by hand to hold the mask steady.
  • Other sizes exist – ResMed also makes Small (16118) and Large (16119) if Standard isn't right.
  • Hand washable – Wash weekly in warm, soapy water and air dry out of direct sunlight.
Description

This is genuine ResMed replacement headgear in size Standard (ResMed 16117). It is for people using an older ResMed Mirage-series mask, such as the Ultra Mirage II, Mirage Activa LT or Mirage Quattro, whose straps have stretched out.

Worn headgear loses its grip, so you end up tightening it more to stop leaks. New straps hold the mask steady again with less pressure on your face. The straps fasten with Velcro, and the headgear clips connect them to the sides of your mask frame.

Fits: ResMed Ultra Mirage and Ultra Mirage II nasal masks, Mirage Activa LT nasal mask, and Mirage Quattro full face mask. ResMed lists 16117 as the standard headgear for these masks.
Does not fit: the Ultra Mirage Full Face mask, Mirage FX, Mirage Liberty, Mirage Vista, Mirage Swift, Quattro FX, Quattro Air and AirFit masks. ResMed sells separate headgear for each of these.

Size: this page has Standard (16117) only. ResMed also makes this headgear in Small (16118) and Large (16119). If your current headgear fits well, order the same size.

When to replace: ResMed recommends new headgear every 6 months, or sooner if it feels stretched or you have to overtighten it.

Care: wash new headgear before first use, as the dye may run. Hand wash weekly in warm water with mild soap; you can wash it without removing the headgear clips. Rinse well and air dry out of direct sunlight. Do not iron it, because the material is heat sensitive.

Mask frame and cushion are not included.

Specifications
Specifications for ResMed Universal Replacement CPAP Headgear for Mirage Series Masks
Manufacturer ResMed
Model 16117
Warranty 90-day warranty
HCPCS Codes A7035
Mask Type Nasal/Full Face
Included items
  • 1 ResMed headgear, Standard
Customer reviews (0)

Product questions & answers

Which masks does this headgear fit?
ResMed lists 16117 as the standard headgear for the Ultra Mirage and Ultra Mirage II nasal masks, the Mirage Activa LT nasal mask and the Mirage Quattro full face mask.
Does it fit the Mirage FX or AirFit masks?
No. The Mirage FX, Mirage Liberty, Mirage Vista, Quattro FX, Quattro Air and AirFit masks each have their own ResMed headgear with different part numbers.
Does it fit the Ultra Mirage Full Face mask?
ResMed lists a different standard headgear for the Ultra Mirage Full Face mask (60674), so this one isn't the listed part for that mask.
Which size do I need?
This page has Standard (16117). ResMed also makes Small (16118) and Large (16119); if your current headgear fits well, order the same size.
What's included?
One ResMed Standard headgear (16117). The mask frame and cushion are not included.
How often should I replace it?
ResMed recommends replacing headgear every 6 months, or sooner if it stretches and you have to overtighten it to stop leaks.
Is this genuine ResMed headgear?
Yes. It is made by ResMed and sold under ResMed part number 16117.

Need help with a different question? Contact our team or call 307-423-0000.

How may we assist you?

Our committed team is available to support you through every step of your treatment journey.